Electro-mechanical Lock A2B-FO/FL-SLTC

• Operation: Fail-Safe (Power-to-lock) for A2B-FO-SLTC Fail-secure (Power-to-unlock) for A2B-FL-SLTC
• Special photoelectric: Three steps current application
• Cylinder function: Unlocks key override or Thumb turn
• Material: 304 stainless steel solid bolt with polishing finish • Voltage: 12 VDC with energy saving design
• Start / Standby current: 1200mA / 200mA
• Time Delay: 0/3/6/9 sec for locking
• Automatic relocking if no action after 5 seconds
• Lock status: Signal output (NC/COM/NO)
• Induction distance: within 8mm
• Vertical or horizontal installation mode
• Operational temperature range -20 °C to +60 °C
• Certificate: CE, EMC, LVD, FCC, VOC, REACH, WEEE
• Weight: 1.8kg

• Equipped with lock cylinder, with realize the dual Purpose, electric and manual control a mechanical emergency exit EN 179 and override key entry, or in order to make EN 13637 scenario by fail-safe model.
• With the special auto-detection input circuit to open the door instead of shutting off the power directly.
• Special auto-detection circuit of electric bolt keeps the bolt retracted while the door unlocked or improperly aligned until the door is properly closed.
• The reed sensor will automatically disconnect when the door is actually closed in order to vandal-proof.
• Lock state (locked/unlocked) is displayed by LED light
• Break-in resistance of 20KN force entry
• Endurance: Tested for over 500,000 times, specially designed solenoid valve can be used for 5~10 years.
• Photoelectricity Control: Low Temperature, safety and durable

A: The low current is changed immediately.
B: When door frame doesn’t coincide with door leaf, door leaf against the bolt, then the electric bolt will start the low-power function to bring low temperature.
C: The Photoelectricity Control Technology, prevent the mechanical defect.